Pro-Tek No Cut Frame Crash Protectors Sliders Made For 2003 2004 2005 2006 2007 2008 Suzuki SV1000 SV1000S SV-1000 SV-1000S SV 1000 S

This Pro-tek no cut frame slider kit is made from acetal plastic for strength and durability. It comes with all steel bolts and mounting hardware along with complete instructions needed for installation.The kit contains two acetal pucks with aluminum shims and steel bolts that clear the fairings by an inch.You do not want a slider to stick out too far or it will cause a bike to flip in a crash by snagging on the ground. You want the puck to either touch down and start to grind off and not catch on anything or if hit hard enough or direct enough to shatter and absorb the initial crash energy. If the slider shatters, grinds off or bends, it did it's job in absorbing the crash energy. You don't want it transferring the energy to other parts of the bike causing more costly damage.The right side puck measures 76mm (3") in length and uses a 10mm x 120mm steel bolt. The left side puck measures 76mm (3") in length and uses a 10mm x 100mm steel bolt. Both bolts are countersunk into the pucks.These frame sliders are brand new in original packaging manufactured in the US from Pro-tek, a leading manufacturer in the motorcycle industry now for 25 years.Applications2003-2008 Suzuki SV-1000/1000SThe frame sliders are to be mounted to your upper engine mount bolts. Refer to your service manual before performing this installation. Remove right hand engine mount bolt (forward of the larger through bolt). Install the longer bolt supplied with slider. Tighten to factory specifications. Loosen the pinch bolt from the left side engine mount (forward of the through bolt). Remove left side engine bolt & install shorter bolt supplied with slider. Tighten to factory specifications. Tighten pinch bolt to factory specifications.Includes: (2) Acetal sliders with aluminum bushings (1) 10mm x 1.25 pitch x 100mm bolt (left side)(1) 10mm x 1.25 pitch x 120mm bolt (right side)

• CNC machined from Acetal Plastic for strength and durability
• No Cut Frame Slider Kit requiring no fairing modifications
• Designed to protect motorcycle frame and engine components
• Comes with one 10mm x 100mm steel bolt and one 10mm x 120mm steel bolt needed for installation
• Manufactured in The USA